UHS
Universal Hydrostatic
UHS
Universal Hydrostatic
The UHS uses float switch technology to continuously monitor liquid-filled double wall containment sumps. Normally submerged, the single float UHS will provide an indication if there is a loss of monitoring liquid.
Highlights
Electro-Optic Interstitial Sensor
- Highly reliable float technology and closed output circuit ensures that leaks are detected.
- Chemical-resistant materials.
- The sensor can be installed into the reservoir of a liquid filled double wall containment sump. The sensor must be installed in a vertical position at a level where it is normally submerged.
- The UHS sensor will alert if the liquid level drops below the bottom of the sensor.
Specifications
Applications
- Typically used for hydrostatic monitoring of the liquid in a double wall sump interstice.
Order Info
| Model Number | Description |
|---|---|
| FMP-UHS | Universal hydrostatic sensor (all EVO™ Series) |
| TSP-UHS | Universal hydrostatic sensor (for use with S940 only) |
-
Note: The FMP-UHS communicates with EVO™ 600/6000 using the Universal
Device Protocol Module (FMP-UDP9). The FMP-UHS also communicates with the
EVO™ 550/5000 and EVO™ 600/6000 using the 2-Wire Sensor Module (TS-2WSNS)
or the 3-Wire Sensor Module (TS-3WSNS).
Downloads
Brochures
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0635 Sensors Datasheet.pdf | 2.64 MB | |
 |
FFS-1040 EVO Series Complete Guide.pdf | 45.85 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0807 (EN) Product Catalogue.pdf | 153.77 MB | |
 |
FFS-0367 (UL) Site Starters Ordering Guide.pdf | 64.42 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
 |
10000010288 FMP-UHS Sensor UL Installation Guide.pdf | 1.17 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
 |
CD_FMS_FMP-UHS_001.pdf | 0.52 MB | |
 |
CD_FMS_FMP-UHS_001.dwg | DWG | 3.13 MB |
 |
CD_FMS_TSP-UHS_001.pdf | 0.52 MB | |
 |
CD_FMS_TSP-UHS_001.dwg | DWG | 3.14 MB |